How to Install the HeadTurner Brake Kit for the XL Crazy Cart
Tools You'll Need Allen wrenches Drill with 1/8" and 9/32" drill bits (1/4" acceptable if needed) Torque wrench (inch-pound) Basic hand tools Step-by-Step Installation 1. Remove Components Remove the front fork Remove the front wheel 2. Prep the Fork for the Bracket Place the brake bracket on the fork, as low as it will sit Mark the center of all 4 bracket holes on the fork Remove the bracket Drill through the outside and inside walls of the fork at the marked points: Start with a 1/8" bit Follow with a 9/32" bit (or 1/4" if that’s what you have; it will be tight) 3. Mount the Bracket and Caliper Mount the caliper and both brackets using the top left...